| BROKEN TENSION RINGS COST YOU MONEY:
Pipets with volume control setting device, which have missing
or broken tension / friction rings cost
your lab $6.00. 8.00. $10.00 even
$12.00 for each pipette at every 6 months to 1 year
interval when serviced.
STAR - RINGS™
SAVE YOU MONEY
 Get
Star-Rings™ available from Cross Calibrate, Inc.
installed
- Call 800-994-2984
- Free to our Existing Customers
with your normal bi-annual and/or annual service requirements
- Star-Rings™ last and last. Unconditional
and Unlimited Warranty for five(5) years!
- No more volume setting drift, O-Rings
that do not break, split, crack or "loop out" (distortion
during the adjustment of the vol. setting)
- Pipetman and similar styled instruments.
(Denville, CLP, Alpha One, VWR)
- "Older style" Gilson Pipetman has
replaceable Tension/Friction Ring.
- Newer models have hard plastic ring
molded in and thus part of the micro-metering bolt.
CROSS CALIBRATE,
INC. MEANS QUALITY
Cross Calibrate, Inc. provides quality
products, skilled technicians, experience, dedication, equipment,
parts, component assemblies, supplies, and a "proprietary
processing of you instruments" assuring your lab receives,
accurate and consistent performance, which is guaranteed in
writing.
CROSS CALIBRATE,
INC. GUARANTEE
- To exceed the "new" instrument performance
results achieved and offered by the manufacturer (any manufacturer)..."We
don't make stuff, we just install the perfection..."
- We clean, renew, repair and then and
only then, we calibrate your lab pipette instruments, strictly
adhering to our "Standard Operating Procedure."
- Our full services will accomplish
longer lasting results in the consistently accurate performance
of your lab ("Pipets Perfected") pipette instruments.
What exactly does your old service provider
do? Are all "calibration" service providers the same?
If you are not an "informed customer", if you are not certain;
find out, get the facts.
CROSS CALIBRATE,
INC. PROVIDES VALUE
The educated consumer is searching for
real "value" not price, not quality, not service but ...
(value **)
= The best obtainable combination of Quality
(demonstrated by performance results, after the work has been
accomplished), Price,
and Service.
A (** good deal) with "Free" Star-Rings™ installed!
CROSS CALIBRATE,
INC. PROMISE
"Because we understand your needs, we
have products and service solutions, with your best interest
in mind and our long-term success guaranteed." -- J.
Roberts President Cross Calibrate, Inc.
 Better Business
Bureau of Metropolitan Dallas, Inc.
1600 Pacific Avenue Ste. 2800
Dallas, TX 75201
Phone: (214)220-2000 Fax: (214)740-0321
www.dallas.bbb.org
ALL
SERVICE(S) PROVIDED IN YOUR LAB BY APPOINTMENT:
DOCUMENTATION / CERTIFIED
& WRITTEN WARRANTY PROVIDED!
ALL
MAJOR MANUFACTURERS:
Hamilton Soft Grip/ Rainin/Gilson/Pipetman,
Oxford, Eppendorf adjustable pipets:
Brinkman and other adjustable multi-channel pipets
In compliance with GLP, GMP, NCCLS, FDC,
and CLIA Guidelines:
| *
All work done at your location!!! |
| 0
- 5 |
pipets .......................... |
$32.00 |
| 6
- 15 |
pipets .......................... |
$30.00 |
| 16 - 25 |
pipets .......................... |
$28.00 |
| 26
- + |
pipets .......................... |
$26.00 |
* Broken
/ Defective or missing parts are additional cost and we leave
the old part(s) with you when we are finished
References upon request:
Competitive price(s) / The best service available and you
don't have to ship you pipets to get it...
YOU
ARE GUARANTEED !!
- A thorough cleaning of
the exterior of the pipette.
- An investigative inspection
to determine: leakage from the shaft (barrel) or coupling.
- A technician's evaluation
for performance of the plunger, ejector, and adjustment
dial for smooth operation.
- Disassembly of the Pipette
and inspection of all component parts.
- Acetone cleaning of the
inner shaft (barrel) and piston.
- "Polishing" of the piston
(stainless steel).
- Acetone cleaning of the
piston again prior to new seal installation and assembly.
- Replacement of the seal;
and O-ring if required at no charge: If there are missing,
defective or broken parts, we replace with new part(s) at
fair prices on your approval and you keep the old part(s).
- Reassemble and operational
check.
- Performance evaluation
and verification at the three (3) volume settings.
- Calibration as required:
(verification with a "five-place" {0.00053} self-calibrating
micro-balance) Balance checked per S.O.P w/known weight
sample(s), essential for P-10, P-2, pipette calibrations,
and verification of low volume 1 ul Hamilton Syringe
performance ...
- You get to watch the
work, approve the work and enjoy the results.
Please
visit some of our friends
|
